Hypertherm Powermax 85 Overview:
The premier system for cutting 1″ (25 mm), the Hypertherm Powermax 85 has the same features and options as the Powermax65, but with more power from a max output current of 85 amps. A variety of Duramax torch styles provide exceptional versatility for hand cutting or gouging, portable automation, X-Y table and robotic cutting or gouging.
Operating data
| Capacity | Thickness | Cut speed |
|---|---|---|
| Cutting | ||
| Recommended | 25 mm (1″) | 500 mm/min (20 ipm) |
| 32 mm (1-1/4″) | 250 mm/min (10 ipm) | |
| Severance (hand cutting) | 38 mm (1-1/2″) | 125 mm/min (5 ipm) |
| Pierce* | 20 mm (3/4″) | |
| * Pierce rating for handheld use or with automatic torch height control | ||
| Capacity | Metal removal rate | Groove profile |
| Gouging | ||
| Typical gouge | 8,8 kg/hr (19.5 lbs/hr) |
5,8 mm D x 7,1 mm W (0.23″ D x 0.28″ W) |
Hypertherm Powermax 85 Specifications:
| Input voltages | CSA |
|---|
200 – 480 V, 1-PH, 50/60 Hz
200 – 600 V, 3-PH, 50/60 Hz
CE
400 V, 3-PH, 50/60 Hz
Input Current @12.2 kWCSA
200/208/240/480 V, 1-PH, 70/68/58/29 A
200/208/240/480/600 V, 3-PH, 42/40/35/18/17 A
CE
380/400 V, 3-PH, 20.5/19.5 A
Output current
25 – 85 A
Rated output voltage
143 VDC
Duty cycle @ 40°C (104°F)CSA
60% @ 85 A, 230 – 600 V, 3-PH
60% @ 85 A, 480 V, 1-PH
50% @ 85 A, 240 V, 1-PH
50% @ 85 A, 200 – 208 V, 3-PH
40% @ 85 A, 200 – 208 V, 1-PH
100% @ 66 A, 230 – 600 V, 1/3-PH
CE
60% @ 85 A, 380/400 V, 3-PH
100% @ 66 A, 380/400 V, 3-PH
Open circuit voltage (OCV)CSA
305 VDC
CE
270 VDC
Dimensions with handles
500 mm (19.7″) D; 234 mm (9.2″) W; 455 mm (17.9″) H
Weight with 7.6 m ( 25′) torchCSA
32 kg (71 lbs)
CE
28 kg (62 lbs)
Hypertherm Powermax 85 Gas Supply
Clean, dry, oil-free air or nitrogen
Recommended gas inlet
flow rate / pressure
Cutting: 189 l/min (400 scfh, 6.7 scfm) @ 5.9 bar (85 psi)
Gouging: 212 l/min (450 scfh, 7.5 scfm) @ 4.8 bar (70 psi)
Input power cable length
3 m (10′)
Power supply type
Inverter – IGBT
Engine-driven generator operation
| Engine drive rating | System output current | Performance (arc stretch) |
|---|---|---|
| 20 kW | 85 A | Full |
| 15 kW | 70 A | Limited |
| 15 kW | 60 A | Full |
| 12 kW | 60 A | Limited |
| 12 kW | 40 A | Full |
| 8 kW | 40 A | Limited |
| 8 kW | 30 A | Full |
Production cut chart
| Material | Thickness | Current | Production cut speed* | ||
|---|---|---|---|---|---|
| inches | mm | amps | ipm | mm/min | |
| Mild steel | 1/4 | 6 | 85 | 160 | 4400 |
| 1/2 | 12 | 85 | 56 | 1600 | |
| 3/4 | 20 | 85 | 29 | 680 | |
| Stainless steel | 1/4 | 6 | 85 | 164 | 4600 |
| 1/2 | 12 | 85 | 48 | 1400 | |
| 3/4 | 20 | 85 | 24 | 570 | |
| Aluminum | 1/4 | 6 | 85 | 172 | 4900 |
| 1/2 | 12 | 85 | 68 | 1930 | |
| 3/4 | 20 | 85 | 37 | 880 | |
| 75° hand torch | 75° and 15° hand torches |
180° full-length machine torch | 180° full-length machine torch and 75° hand torch | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power supplies | Voltage configurations | 7.6 m (25′) | 15.2 m (50′) | 7.6 m (25′) | 15.2 m (50′) | 7.6 m (25′) | 15.2 m (50′) | ||||||
7.6 m (25′)
with Eliminizer filter and cover without remote pendantwith remote pendantwithout remote pendantwith I/O cables (no pendant)with remote pendantwithout remote pendantwith I/O cables (no pendant)with remote pendant
Standard power supply200-600 V CSA087108087111
087109
400 V CE087117087120
087118
Power supply with CPC port and voltage divider200-600 V CSA087113 087114087144087145087115087132 087116087137 087135400 V CE087122 087123087146087147087124
087131
087136Power supply with CPC port, voltage divider, and serial port200-600 V CSA 087138 087140 400 V CE 087139 087141