MTX Flex 6 Hybrid Punch Press Machines
The frame of the MTX plus is a Meehanite® nodular cast iron monoblock resistant to 700N/mm², designed by FEM (finite element method). The punching head is directly built into the monoblock frame. In practical terms, like all the other new punching machines, the MTX has a more robust (no welding points), reliable, precise frame which is also particularly compact, using less floor space and ensuring impressive flexibility in loading different sheet sizes. What’s more, thanks to the Flex system, the MTX can punch at high speed while maintaining a constant punching depth.
Which one is better Electrical or Hydraulic? Why don’t get the best of both systems? Our unique Hybrid System which we call Flex (2 patents pending) has the power of the hydraulics combined with the precision of the electronic control. Low power requirement of only 8,5 kw and averaging only 4,5 kw while punching. Besides being able to set the length of up and down stroke, the Flex System for each tool lets you set:
– Hit rate from 10 to 2000 Hits/min
– Acceleration/Deceleration of ram movement
– Dwell time
Thanks to the Flex System any Euromac owner now commands unlimited forming capabilities as well as the tools to process any application in a fast, reliable and cost efficient manner.
C- Frame monoblock:
The new frame with an increase of dimensions enables the machine to operate with higher speeds thus ensuring greater stability and working precision.
Our machine frame is a normalized nodular cast iron monoblock in Meehanite® with 700N/mm2, designed with FEM (Finite Element Method), punching head directly built into the monoblock frame.
In practical terms this means a more robust (no welding points), precise and reliable structure being at the same time compact, hence using less floor space and allowing flexibility in loading different sheet sizes.
Key features of the MTX Flex 6 Punch Press Machine
- AUTOINDEX SYSTEM
The direct drive tool rotation in the Euromac AutoIndex stations uses fewer mechanical components to guarantee strength, more reliable machining results and reduced maintenance, with huge time savings.
- UPFORMING SYSTEM
The 6 B stations of the MTX FLEX 12 turret feature retractable dies for more forming flexibility. Standard thick turrettooling forming tools usually have an “active” die. These dies protrude a few millimeters over the normal height of a standard punch die, requiring special attention to setup and programming.
- ELIMINATING RESTRICTION
All additional 6 B-Stations of the MTX FLEX 12 can be raised up to 6 mm only when the tool is actually employed and lowered when it is passive eliminating any restriction.
- VACUUM SYSTEM
Our vacuum system prevents scraps from remaining on the sheet, potentially damaging its surface and sometimes even the tool itself. Strongly recommended when processing thin materials, material with protective film or aluminium in general.
Optional on all models
- LOADING & UNLOADING CAPACITY
Easy loading of material for machining and unloading of finished parts generates much higher productivity for you.
- MACHINING CAPABILITY
As for all Euromac products, flexibility is key: just one machine can process a vast assortment of sizes. All sizes between the stated minimum and maximum dimensions can be processed.