Farm Equipment Maintenance -Examples of plasma uses

  • Chemical sprayer repair
  • Corroded or damaged segments of sprayer booms, with typical wall thickness of 6 mm (<1/4″), are cut away for replacement.

Systems: Powermax45 or 65

  • Silo unloader repair
  • Corroded or loose components are cut off for repair or replacement.

Systems: Powermax30 XP, 45 or 65

Wheeled equipment repair

Corroded, worn or distorted metal, of up to 12 mm (1/2″) thick, on bailers, harvesters, hoppers, etc., are cut off for replacement.

Systems: Powermax45 or 65

  • Truck maintenance
  • Corroded or collision damaged body panels, of up to 3 mm (1/8″) thick, are cut away for the installation of replacement panels.
  • Systems: Powermax30 XP or 45

Key advantages of Powermax® systems

  • Superior speed of plasma cutting results in shorter cut times and greater productivity over processes such as oxyfuel or saws.
  • Easy to set up and operate.
  • Piercing capability makes starting interior cuts easy.
  • High cut quality reduces or eliminates secondary operations, such as grinding.
  • Drag-cutting technology makes it easy to follow a line or template.
  • Gouging process efficiently removes existing welds with reduced noise and smoke over conventional methods.
  • System portability offers ease of use at various locations.
  • Controlled arc and high cutting speeds reduce heat-affected zone and warping.
  • Cut a variety of ferrous and non-ferrous metals including mild steel, stainless and aluminum – painted or rusted.
  • FineCut® consumables deliver higher quality cut with less dross, narrower kerf and smaller heat-affected zone.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hypertherm, Powermax and FineCut are trademarks of Hypertherm Inc. and may be registered in the United States and/‌or other countries. All other trademarks are the properties of their respective owners.

 

  • 3/2015 Hypertherm Inc. Revision 7 890340

 

 

Examples of plasma uses

 

Chemical sprayer repair

 

Corroded or damaged segments of sprayer booms, with typical wall thickness of 6 mm (<1/4″), are cut away for replacement.

 

Systems: Powermax45 or 65

 

Silo unloader repair

 

Corroded or loose components are cut off for repair or replacement.

 

Systems: Powermax30 XP, 45 or 65

 

Wheeled equipment repair

 

Corroded, worn or distorted metal, of up to 12 mm (1/2″) thick, on bailers, harvesters, hoppers, etc., are cut off for replacement.

 

Systems: Powermax45 or 65

 

Truck maintenance

 

Corroded or collision damaged body panels, of up to 3 mm (1/8″) thick, are cut away for the installation of replacement panels.

 

Systems: Powermax30 XP or 45

 

 

 

 

 

Key advantages of Powermax® systems

 

  • Superior speed of plasma cutting results in shorter cut times and greater productivity over processes such as oxyfuel or saws.

 

  • Easy to set up and operate.

 

  • Piercing capability makes starting interior cuts easy.

 

  • High cut quality reduces or eliminates secondary operations, such as grinding.
  • Drag-cutting technology makes it easy to follow a line or template.

 

  • Gouging process efficiently removes existing welds with reduced noise and smoke over conventional methods.

 

  • System portability offers ease of use at various locations.

 

  • Controlled arc and high cutting speeds reduce heat-affected zone and warping.
  • Cut a variety of ferrous and non-ferrous metals including mild steel, stainless and aluminum – painted or rusted.

 

FineCut® consumables deliver higher quality cut with less dross, narrower kerf and smaller heat-affected zone