The Power Bend Pro 3 Axes CNC Press Brake
Stronger, faster and deeper bends;
Power-Bend Series machines redesigned based on users preferences to become a unique machine with its individual electronic and mechanical features.
Power Bend Pro 3 Axes CNC Press Brake Series are among the highest rated machines which will help you increase your productivity and keep costs at minimum level with its user friendly CNC controller and low cost hydraulic maintenance.
New Power Bend Pro 3 Axes CNC Press Brake is exactly what you need for your production where complicated, sensitive, single or multiple bends on high speed are paramount.
Combination of speed and power
- High quality and repetitive bending is obtained by using synchronized cylinders and valves.
- Automatic utilisation of all axes on startup.
- All ERMAKSAN machines are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel using the latest technology
- Rigid upper beam runs on 8-point bearings with bending precision of 0,01 mm.
- Well-known top and bottom tool brands are long lasting hardened and provide precise bending.
- Silent high pressure pump.
- High Free Fall Speed
- High Bending Speed
- High Returning Speed
- Chrome coated cylinders are machined with 0,001 mm precision and pistons are specially hardened.
- Original clamps are user friendly and machined with high precision.
- Front support arms are slideable along machine length and easy to adjust.
- Compact and well-known brand HOERBIEGER hydraulics are produced according to CE standards.
- Two photocells on sides for rear guard.
- Fast tool tightening.
- Optic linear scales are sensitive up to ± 0,01 mm.
- Synchronized working cylinders will give you the best bending result with its perfect repeatability ratio.
- 2 axis ultra strong backgauge system (X=800 mm and R), with ± 0,01 mm. repeatability, moves along rails and ball screw, bending length controlled by CNC controller, foldable back gauge fingers for reverse bending applications.
- Multifunctional and highly programmable, 2D CYBELEC DNC 600 CNC controller.
- SIEMENS electrical system.
- Automatic axis referencing when machine is turned on.
- Side guard is standard meeting CE regulations.
Your best bending solution
- Perfect configuration for sensitive bending and economic solutions.
- Precise results for long and deep bends.
- Continuous sensitivity with crowning system.
- Long lasting rigid body is also suitable for heavy duty applications.
- Easy maintenance.
You can bend longer and deeper parts with maximum repeatability with standard Power-Bend Pro machines.
Impressive bending solutions:
Equipment alternatives can be upgraded on Power Bend Pro 3 Axes CNC Press Brake Series upon request. Thus, increased productivity achieved while bending.
- Height adjustable and movable sliding front support arms.
- Top and bottom tools are surface hardened by special treatment.
- Promecam easy clamping system.
- CYBELEC DNC 600S controller with PC1200 2D software.
- CNC controlled strong X=800 mm back gauge
- 410 mm throat depth.
- 2 back gauge fingers
- Scales in metric and inches.
- Crowning system in bottom beam 3100/…/4100 – 260 – 320 manual crowning and from 400 tn and above motorized crowning is standard.
- Foot pedal is produced according to CE standards and suitable for single and multiple bends.
- 2 photocells are placed facing each other for rear guards.
- Covers for cylinders and top beam
- Preadjusted electrical requirements based on customer’s geographical area.
Ease of use:
- High resolution 9,4” 2D graphic display.
- Easy set up and use that meets operator’s needs.
- Rapid data input with the ergonomic keyboard with large keys.
- 2D graphic representation of the part.
- Programming of all the part in a single page.
- Easy installation and training.
- Contextual help and warning pop-ups.
- 99 repeatable bends.
- Library of 50 upper and lower tools.
- Accurate ram positioning by closed loop control of speed, pressure and parallelism.
- Back up facility of the programs, tool library and machine parameters with the standard
- Cybelec backup software
- Communication with the machine by full-blown graphical programming at the office environment with the standard PC 1200 2D software (offline software).
First part, good part:
- Easy precision adjustment by simple access to the machine parameters.
- Consecutive program operating feature for high numbers of bend sequence.
- Inputting the angle and bend corrections directly on the controller.
- All basic functions.
- CE safety management.
- Easy communication.
- More than 20 language options.
- Robust and ergonomic design.